What exactly is the difference between a surge protector and a fuse? Can a fuse protect the electronic devices from lightning instead of surge protector?
12.06.2025 02:09

so, what happens?
What is lightning?
If the nominal power is 4,000 watts then the current at 230volts is 16 amps.
He then describes the function of a fuse.
2024–10–11 [Victor Olarewsju Victor Olarewaju ]
This is 'the assistant's answer'
We've finally slowed the surge in overdose deaths. The Trump admin may undo all of it - Salon.com
The third is lightning and “how it gets conducted into a home.”
Would individual surge supressors have save this equipment? most likely, since the surge supressor would take the jolt instead of the electronic components.
The MOV will conduct when the voltage exceeds 50% of line voltage.
the problem then depends on "how fast does the fuse operate?".
These are simplified answers to the original question, and does not change anything I wrote above.
“ … to protect building, lightning arrestor, is provided above building and directly connected to earth.”
GLP-1 drugs may be linked to elevated risk of serious eye disease, study finds - statnews.com
At least they know the answer if they wanted it.
This is a high voltage low current spike that comes down the line because of the power poles being struck, and the voltage suppressors activating on the primary side of the transformer.
This is an electronic circuit designed to clamp voltages so that the Voltage Potential that appears at the outlet is never going to exceed the nominal value.
The two rules investors need to follow right now as the S&P 500 eyes a return to 6,000 - MarketWatch
What does a fuse do?
Barnstars:
but I think this circuit , shows a few more pieces.
This device then solves the entire problem.
It seems Mohan does not understand the difference between a comment and an Answer.
This is where this question deviates from being a 'generic' question, and becomes more specific.
The bolt then partially travels down the line to your home.
Once the voltage goes over 0.0650 volts, then this fact can be used to amplify the difference, and turn the circuit breaker off , furthur down the line. Essentially that is what a RCD/GFCI does, it compares the incoming current, to the outgoing current, and if the difference between the two currents is over 5mA, then it trips the circuit breaker.
So, the voltage could go up to 500 volts, and the fuse will not open up.
(Dc diagram shown, AC is similar).
A fuse is a non-resetable over current circuit protector.
P = e* I, so since I is 16 amps, then the voltage dropped is 1/16 volt or 0.0650 volts.
What celebrity do you admire the most?
but this device (an Inductor) … impedes the rapid changes in the current.
“ A surge suppressor is the one which is connected at the input supply so that when there is a sudden change voltage it bypasses thereby protecting the (circuit) and electronic components”
I post the exact comment here.
How did you respond to, "Why do you love me"?
(There is no concept of polarity, in the loop because the current changes direction 100 to 120 times a second (power frequency).
[image of Common-mode choke]
OK, this is Mohan Rajaratnam’s definition of a Surge suppressor.
Turning the Red Planet green? It's time to take terraforming Mars seriously, scientists say - Space
Lightning arrestor is a spark-gap device, and can be installed anywhere. What is important, is that the wire is thick enough to withstand the lightning bolt and conduct the energy away from the building.
In schematic diagrams this is the symbol for a fuse:
2024–10–16 [ OO OLAOYE OYEBODE ]
He then describes Rainy Season and Lightning.
But during the surge, the fuse will not blow if it is a longer duration and lower value )10 to 50%).
Because the load is inductive, the current lags the voltage.(by a bit).
This is the picture of an electronic coil of wire wound around a core of magnetic material.
It also is a device that limits the change in current flow.
He then asserts :
Samsung is giving these Galaxy phones a big One UI upgrade - here's which models qualify - ZDNET
An AC voltage/ current source, and an ac inductive load.
This is a photo where a lightning bolt took out a home's complete mains distribution box, and a lot of electronic gear as well.
First Sentence:
Can being annoyed be a sign of getting angry?
This one hit behind the barn.
One is “what exactly is in a ‘surge protector’ ? ”
a photo is worth a thousand words.
2024–10–11 [Bobby Sanchez Bobby Sanchez ].
[old diagram got deleted by accident]
So combined with a device called a MOV or Metal-oxide-resistor, then forms the 3rd part of a “surge suppressor “.
2024–10–10[John johnson John Johnson ]
what exactly is a ‘surge’ protector?
so, the loop of wire then, when put together with another loop reduces the ‘noise’ on a power line.
And this is the problem alone. Is the power supply in the equipmemt designed with a lightning strike in mind? Some yes, others, no.
For this case there are devices called Metal oxide varistors (MOV).
Fuses, on their own, then operate much slower than the MOV variable resistance, during the lightning strike.
Can the fuse protect the electronic devices from lightning instead of a surge protector.
Edit 2024–10.
There is no harm in having the surge suppressor along with the fuse in the circuit. The fuse will not open up until the current melts the link. This will take time, and in the interim, that jolt will get transmitted into the power supplies.
2024–10–00 [ Ammar Mahdi ] Ammar Mahdi
But it can get overloaded, and no longer works.
nine
At the secondary, it is 1000 times less.)turns ratio). If it gets hit with a 100,000 volt bolt of lightning then the voltage arrestors conduct and clamp the voltage down to line voltage, ( but a small amount leaks down the line). This is the problem.
eight
Is the question then , "why buy a surge supressor, if the fuse alone protects the electronic circuits from a lightning bolt?".
A circuit breaker is similar, but is resettable.
One
When the current is 200% of the rated value , it will “go open” (the link metal melts) and protect the device.
It’s been three xxx five werks, and there has been no response to my follow on query on his Commment to my answer.
At one ohm, the resistor has a maximum of 1 watt power.
So, it’s possible that these devices from Trip Lite have addition suppression devices, these ones seem to be sturdy.
There are two important concepts here.
2024–10–14 [Omar Gharbi Omar Gharbi ]
These devices are installed between the “hot” and “neutral” and protective ground.
“ A fuse is a device which protects the (circuit) against overload and short circuit.”
This is where the MOV conducts again, and dissipated the energy.
2024–09–27 [ Mohan Rajaratnam Mohan Rajaratnam ] . Thinks you can get free electricity from nothing : Mohan Rajaratnam's answer to Is it possible to generate free electricity at home using a magnet or other low-cost methods? If so, how does it work?
There are three different concepts here that are getting confused.
Here is a simplified AC power diagram.
Upvotes:
But… the neutral is now “floating” because of the 1 ohm resistance.
The other is “what does a “fuse” do?”
Mohan forgets that a fuse is a one-time device, and needs to be replaced if it is tripped.
Now when you have a certain ac resistance, then a current flows in a loop.